Posts Tagged ‘wood sculpting’

What Is Relief Carving?

It has come to my attention I have never explained what relief carving is or the different types. So, I thought I would do my best to explain this to you. Here goes…

There are actually several types of carvings. The type of carving I use is called full relief carving. This means I have a smooth piece of wood, like a gun stock, that I carve part of the wood away. The end result is the place where the picture is and there is no part of the original gun stock left in the area of the picture. In other words, the front side of a picture in 3D. There is 2D carving, or semi relief carving, which is a carving you would get if you left part of the original wood in the picture. You usually will see this from carving which has been completed by a laser. You do not get much shaping, (deminsion) to your picture/carving. There is also full round carving. This would be when you take a block of wood (say 4 inch by 4 inch) and carve the entire animal or object out of the wood. Like carving the complete elk, legs and all. Like the status of animals, etc. Here are a few of examples.

(Full Relief Carving)

As you can see this gun stock of a moose. I have used the full relief carving method to carve this gun stock. There is nothing left of the original gun stock in the picture. There is, however, the original gunstock outside the design.

(Semi Relief Carving)

Yet on the wood carving of the horses head, (shown above), there is still part of the original plate left in the main picture design. This is knows as semi relief carving.

(Full Round Carving) – ( This carving is a Craig Hone original)

With full round carving, (shown in the picture above) there is nothing left of the original outside portion of wood. The difference is you have all sides carved with the full round carving, only one half of a carving is left with the full relieve carving method, and with the semi relief method you still have part of the original wood in the picture.

After I have carved my design, I sand the project. Then I hand paint each carving. To me this helps to define the carving even more and it helps to bring the carving to life.

I hope this helps you to understand the types of carvings as well as just how unique each type of carving is. If you have any questions about this or have a question about something I have talked about on one of my posts. Please feel free to ask me in the comments below. I would be happy to explain it to you. If I don’t know something I will find out for you and let you know.

Thanks for stopping by. I appreciate your comments and feed back. Have a wonderful summer! Deb L

Gun Stock Carving Article

The gun stock carving article listed below was in the Uintah Basin Standard newspaper in the Basin Life section. It is an article on me and how I do my carvings. As well as how I got started in this business. The article came out on Wednesday, June 2, 2010. I have included it here in its entirety so everyone can enjoy reading it.

Your comments are greatly appreciated. Please feel free to leaving them below. Don’t forget to tell your friends and family to have a look too. Thanks again, Deb Lindsay

Boneta artist’s creativity spans from guns to glass

By Cheryl Mecham, Uintah Basin Standard

The first carving Deb Lindsay took to a gun show happened to be on a stock for a sub-machine gun. She didn’t know that until a security man stopped her just inside the front doors.

“He said ‘I’ve gotta check that gun,’” she recalled with a laugh. “He didn’t know that there wasn’t a gun attached, it was just the stock.”

Lindsay explained her mistake. She’d ordered a few gunstocks from a website.

“They were about the right size and they were cheap. I didn’t know what they were,” she confessed, her laughter filling the kitchen of the home she shares with her husband, Allen. Read the rest of this entry »

Gunstock Carving

I am scheduled to attend another gunstock carving class. This class is to teach more indepth knowledge of the anatomy of a horses body. The horses body is like so many other animals. The moose, deer, elk, etc. Structure is very imortant. Muscle placement, the way the skin lays over the muscles as well as the bones. With out this knowledge the animal you are carving will not look right. So, I am intent on learning everything I can so make my carvings more realistic and true to life.

The .300 mag is coming along very nicely. It is almost ready for the unveiling! Hope everyone survived the spring storm this week. We have received snow last night along with rain. Hopefully it will make up for the adiquite snow fall we did not receive this last winter. Thanks for coming to my web site. I hope you enjoyed yourself while you where here. Please feel free to leave your comments. It is always nice to see what others think of my carvings. Thanks again Deb

Thank you!!!

This last year has been a very special time for me. I have made many wonderful friends. For this reason, I would like to express my appreciation to all of you. You have helped me and inspiried me to step out of my comfort zone. First, I would like to thank YOU my clients for your support, kind words of encourgement, and for purchasing my art. It means a great deal to me to know my work is so highly appreciated. Secondly, I would like to thank all the teachers who have helped me understand how to use the Paragrave tool. Dr. Lew Jensen, Tamaree Littlefield, Keith Hone, Craig Hone, Darwin Dower, and Jeff Wolfe just to mention a few. All of you have given me encourgement and insight. Not to mention the knowledge of anatomy sculpting, wood carving, gunstock carving, leaf carving or answering stupid questions. The art I carve on the gunstocks and wood carvings would not be possible without your help. And last, my husband Allen, for your love and support, and for giving me the ultimate opportunity to express my creativity.

It is not easy to step out of your comfort zone and express your inner thoughts and desires. Or to carve the images you have floating around in your mind. Thus creating wonderful wood carving or sculpture. Normally, I would have made something I thought was nice. Then given it away as a gift. All the while hoping the recepient would enjoy it just a little. Today, I know my art is appreciated. By the over whelming response I received on a daily basis from you – my clients, friends, family, and teachers.

Thank you just doesn’t seem enough to express my deep appreciation. Still, that is all I can do for now.

THANK YOU! I am truly grateful! Deb

On a side note, this year is proving to be even more wonderful then the last. I am scheduled to go to a gun show in September. I will be at the South Town Expo Center on Sept. 25 & 26, 2010. Please come by and say hello. I would love meeting you in person!

GUNSTOCK CARVING ON THIS WINCHESTER 308

While attending one of the many gun shows my husband and I frequent each year. We found several guns that, in my opinion, needed help. We purchased this Winchester .308 model 88 rifle. I chose to put a gunstock carving on this Winchester 308 because the stock was in desperate need of being refinished. There are several deep nicks and scratches on the butt of the gun. Along with the fact, someone has applied several coats of varnish to the stock. I would venture to guess they where trying to cover up the large scratches in the stock. In doing this, they have filled in the original checkering on the grip and forend of the gun. Thus making the gun look like the checkering is almost warn off.

I have stripped the stock of the old varnish, carve mountain goats on the stock, carve the basket weave pattern on the grip and the forend of the stock. As well as painted the carved sceen to bring it to life even more.

The history or background of the gun I am carving has become a very intersting past time for me. Here is some of the history I have found of the Winchester rifle. I hope you enjoy reading about the gun as much as I have. (If the pictures do not load. Please right click on the picture and choose “show picture”).

Read the rest of this entry »

CUSTOM GUNSTOCK CARVING

Sorry to say, this gun will not be carved. The pattern the customer had choosen would not fit on the gun. So we have elected not to carve the gun. We’ll wait and carve a rifle for their anniversary instead. This will give the customer time to design a custom gunstock carving.

With the snow here and more to come, I’m glad I can stay in out of the cold and enjoy another custom gunstock carving. The gun I am building a pattern for is an Thompson Center Encore pistol. This gun will be a christmas gift from his wife and children.

Read the rest of this entry »

CARVED GREENER SHOTGUN

I have been given a unique opportunity to carve a stagecoach on a W. W. Greener replica shotgun. This carved greener shotgun was completed for a great great grandson of the Wells Fargo Stageline. The great great grandfather was one of the original gunmen employeed by the Wells Fargo Stagelines of long ago.

This gun will always remind my customer of his family history. The story is now well preserved, carved here on the replica of his Greener shotgun. He will no doubt hand this gun down to his children and they to their for generations to come.

I have found it very interesting reading the history of the W. W. Greener shotgun. I hope you enjoy learning as much about this as I have.

Read the rest of this entry »

W.W.GREENER SHOTGUN

Have you ever wondered what kind of gun they use to carry on the Wells Fargo stagecoaches? After being asked to carve a stagecoach on a W. W.  Greener shotgun replica. I was intrigued to find out how the gun came about.

Wells Fargo stagecoaches where equipped with the W.W. Greener shotgun after the stagecoaches where repeatly robbed. These guns where made by W.W. Greener. The gun was an unmistakable icon of Wells Fargo stage lines. There was always a driver and a gunmen sitting on top of the stagecoaches to protect their passangers and the cargo they carried. The gun  usually was a double barrel 10 gauge shotgun with a double pull. It has a short barrel of only 20 inch in length. The gun is very heavy compared to other shot guns I have held.

After much research, I have found this gun is one of the most reproduced guns in the world. Even gun authenticators have a hard time proving the gun is authentic. Even if a gun marked “Wells Fargo & Co. Express” does not mean it is in fact a W. W. Greener gun. Having the symbols marked on the gun does not mean it is an authentic Greener gun either. The history shows many gun manufactures built this type of gun and would mark it in hopes of fooling the buyer into believing the gun was a real W. W. Greener shotgun. Unless you have paperwork proving complete authenticity and proven by history experts. It is highly likely you do have a authentic W. W. Greener shotgun.

Although the legend lived on in this gun. A authentic W. W. Greener shotgun is one of the most sot after guns today by gun collectors.

CUSTOM CARVED GUNSTOCK

This is a custom carved gunstock for a long time friend. It is carved on a Remington 22-250 cal. The sceen that inspired me to carve this for him came from one of the many rides my husband and I take every weekend.

If you ever get the chance to visit the Uintah mountains in the fall of the year. You will find a serenity of peace and harmony. My husband and I enjoy going for rides in the mountains. It is a time to see the changing of the leaves and hopefully see some wildlife. One of our favorite animals is the majestic bull elk. They are usually in the rut about this time of year. Just after the bull elk shed the velvet from his horns. He will begin bugling to entice the cow elk to come to him. This is called “the rut.” The rut can begin as early as mid August to early September and will last well into November. When two bull elk want the same herd of cows they will fight each other for the rights to breed with the cows. This keeps the herds strong and healthy.

If you ever have the chance to be in the mountains and hear the bulls elk bugling. You will never forget the sound. It is the call of the wild. Nature’s way of helping animals to reproduce thus carrying on the species. We look forward to this time of year. We love to be out in nature. Looking and listening not only the majestic bull elk, but for the deer and other wildlife as well.

MULE DEER GUNSTOCK CARVING

Mule deer gunstock carving –My husband had this gun but was wanting to sell it. The gunstock looked like someone had left it out in the weather for several years.  It was badly weather checked. I refinished the stock then carved a picture of three mule deer bucks along with the basket weave patten on the gunstock. As you can see in the last picture. This gun has now been restored to a pristine condition. And my husband refuses to sell the gun.