This gun stock is custom carved for the Mule Deer Foundation. It is to be raffled off at the International Sportsman’s Expo this coming 2012, in Salt Lake City. This gun stock was quite fun to create. I found a picture of the deer on an old calendar. After playing with the picture I decided to carve it for the MDF this year.

The gun stock fits a Weatherby rifle. It has been custom carved/sculpted with three mule deer all of different ages. I have also hand painted the scene to bring out even more of the detail. On the bottom of the grip I have inlayed the MDF logo in composite ivory.

The lucky winner will be drawn during the International Sportsman’s Expo. You will have to check the MDF magazine to find out more details regarding this raffle. I’m sure whom ever the lucky winner is will enjoy this gun and will enjoy handing this gun down to their children and their children’s children for generations to come. It is a one of a kind master piece which any gun collector would be more then happy to add to their gun collection. Below is a little history of the Weatherby company.

History

The history of Weatherby® began in the mid-1940s when a young cartridge “wildcatter” named Roy Weatherby set out to change the world of firearm performance. Contrary to then-popular thinking (heavy bullets pushed at slow speeds), Roy believed that lightweight bullets traveling at super high speeds provided the best combination for one-shot kills. Based upon that philosophy, he spent the next decade developing the high-powered Weatherby Magnum cartridges for which the company is known today (.224, .240, .257, .270, 7mm, .300, .30-378, .340, .338-378, .375, .378, .416 and .460).

Throughout that period, Roy was also producing or re-chambering rifles designed specifically to accommodate his super-charged ammunition. At that time, he was producing his rifles on FN Mauser and French Brevex Magnum Mauser actions. However in 1957, Roy would again catch the attention of the shooting and hunting world with a proprietary action that is today recognized around the world as the Mark V®.

The foundation for the Mark V® was the need for a stronger, safer action, able to withstand tremendous pressure, and the possibility of blown primers and ruptured case heads (due to the unpredictability of early handloaded and wildcat cartridges). After nearly a half century of proven performance, the Mark V® continues to be known as the world’s strongest bolt action.

Roy Weatherby examines the results of shooting his magnum cartridges through water–soaked Los Angeles telephone directories.

Roy Weatherby and Roy Rogers after bear hunting with a Mark V.

In 1970, Roy once again showed his entrepreneurial spirit when he introduced the Weatherby® Vanguard® action, borrowing many of the same characteristics and design elements of the Mark V® with two locking lugs (vs. 9 in the Mark V).

The Weatherby® lineage continued in 1983 when Roy’s son, Ed Weatherby, assumed the leadership mantle of the company. Under Ed’s guidance, the company has seen growth and expansion both in Mark V® and Vanguard® offerings, including the new Vanguard® Series 2 rifle, which features guaranteed SUB-MOA accuracy. In addition to rifles, we offer a full line of Semi-Automatic and Pump shotguns, as well as accessories, apparel and collectibles.

The innovation and pacesetting performance associated with the Weatherby® name spans more than 65 years. Yet, while our place in history is firmly established, it is the prospects for the future that shine brightest of all.

Custom carved Marlin 30-30 is a gun everyone knows about. A sure fire and very accurate gun to shoot. This gun belonged to my late father-in-law, Bob. He was an avid hunter with a VERY deadly aim. He was known around the Basin for his marksmanship. I am very proud to be given the opportunity to carve this design onto Bob’s gun. Thanks Mom!

I found this picture of the elk on the back of a truck window. It struck me as something my father-in-law would have liked. As I was carving/sculpting this design my mind was wondering. I remember thinking the name of this piece will be “Whispers of time” In the foothills, the wind whispers through the trees, creating a mournful wail. The “King” answers with a warning “They’re mine now!” Then, the thought came to put and elk’s horns that had been shed on the forend of the gun stock. Giving the illusion of a King that once was.

This gun stock has been custom carved/sculpted with a bull elk protecting his herd. The gun has been hand painted and signed. It is a one of a kind master piece. I know this gun will never leave the family. It will be handed down from generation to generation. Many stories will be told around the campfire of how Grandpa was an exceptional marksman, and how he loved to hunt.

Thanks again Mom for allowing me to carve this story into this gun for our family. Deb

Gun History

I have included the history of the Marlin 30-30. I hope you enjoy reading about this gun.

The .30-30 Winchester/.30 Winchester Center Fire/7.62×51mmR cartridge was first marketed in early 1895 for the Winchester Model 1894 lever-action rifle.^[2] The .30-30 (thirty-thirty), as it is most commonly known, was the USA’s first small-bore, sporting rifle cartridge designed for smokeless powder. The .30-30 is one of the most common deer cartridges in North America. Popular in Mexico and Latin America, it is known there as the treinta-treinta.^[3]

[edit] Naming

Although the original name used by Winchester on their firearms and ammunition was .30 WCF, the designation .30-30 was used by both Marlin and Union Metallic Cartridge Co., who did not want to put the name of rival Winchester on their products.^[4] The added -30 stands for the standard load of 30 grains (1.9 g) of early smokeless powder, which was on par with current IMR/DuPont’s 4064. Over time Marlin’s variation on the name stuck, though “.30 WCF” is also used.

[edit] Characteristics and use

The .30-30 is considered to be the “entry-class” for modern deer cartridges. While it will take deer-sized and black bear-sized game, it is limited in effective range to approximately 200 yards (183 m) for that purpose. It is common to define the characteristics of similar cartridges as being in “.30-30 class” when describing their effectiveness. The .30-30 is typically loaded with bullets weighing between 150 and 170 grains (9.7–11.0 g), but lighter loads are possible. Bullets of up to 180 grains (11.7 g) can be used but the overall length restrictions of the lever action rifles used for this round limit their usefulness.

One of the primary reasons for the .30-30′s popularity amongst deer hunters is its light recoil. Average recoil from a typical 150-grain (9.7 g) load at 2,390 feet per second (730 m/s) in a 7.5-pound (3.4 kg) rifle is 10.6 pounds-force (47 N) of felt recoil at the shooter’s shoulder.^[5] This, combined with the cartridge’s ability to take the majority of large game in North America, as long as the game is within 200 yards (180 m) of the shooter, results in a highly effective hunting round.

Because the majority of rifles chambered in .30-30 are lever-action rifles with tubular magazines, most .30-30 cartridges are loaded with round-nose or flat-nose bullets. This is to prevent a spitzer-point bullet (the shape seen on the .308 Winchester above) from setting off the primer of the cartridge ahead of it in the magazine during recoil. Were that to happen, the gun would probably be damaged or destroyed and the shooter seriously injured. The Savage Model 99 was introduced in 1899 with a rotary magazine, in part to avoid that issue. When used in single-shot rifles or handguns, such as the Thompson Center Arms Contender or Encore series, it is common for shooters to handload the cartridge with spire-point bullets for improved ballistics.

A notable exception to the “no-spire point” guidelines for tubular magazines is the new Hornady LEVERevolution line of flexible memory elastomer tipped ammunition.^[6] By allowing a more efficient bullet shape, it allows a lighter bullet, higher muzzle velocity, and flatter trajectory. Given the popularity of the .30-30 cartridge and the lever action rifle, the potential market for the new ammunition is huge. Early reports indicate substantially improved accuracy with the round and at good terminal ballistic performance.^[7][8]

.30 WINCHESTER SMOKELESS first appeared in Winchester’s catalog No. 55, dated August, 1895. As chambered in the Winchester Model 1894 carbine and rifle, it was also known as .30 Winchester Centerfire or .30 WCF. When the cartridge was chambered in the Marlin Model 1893 rifle, rival gunmaker Marlin used the designation .30-30 or .30-30 Smokeless.^[9]

As originally produced by Winchester Repeating Arms (WRA) and Union Metallic Cartridge Company (UMC, who dubbed the cartridge .30-30), it was manufactured with a metal patched lead bullet weighing 160 gr. However, one year later UMC produced a 170 gr. bullet offering. 150 gr. and 170 gr. bullets continue to be very popular, as seen in the number of these weights offered by current manufacturers, although the 160 gr. bullet weight has reappeared in the Hornady cartridge noted above. Jacketed bullets for the .30-30 are .308 inches nominal diameter. Cast lead bullets for the .30-30 are also popular, and usually are dimensioned to .309 inches in diameter for use in the .30-30.

The .30-30 is one of the relatively few currently popular centerfire rifle cartridges that have a rimmed case. The .30-30, like most other rimmed case examples, such as the 7.62x54mmR, the .303 British, the 9.3x74mmR, the .45-70, and the Nitro Express cartridges, were all old cartridges in wide use before rimless designs were introduced for bolt action rifles. The modern .307 Winchester, .308 Marlin Express, and the .444 Marlin are exceptions to the trend toward rimless but all of these are cartridges designed specifically for lever action rifles.

[edit] Rifles and handguns chambered in .30-30

.30 WCF ammunition

The .30-30 is by far the most common chambering in lever action rifles^[10] such as the Winchester Model 1894, the Savage Model 99, and the Marlin Model 336. Mossberg also came out with quite a few lever action rifles in the chambering, the Mossberg model 472,479 and the newer 464 .You can also find these Mossberg rifles under the brands of Western Field[sold through Montgomery Wards as the M72]and through Sears and Roebuck under the name Revelation[model 200]The 472 was only produced from 1970 to 1979 and the 479 until 1983 both of which are rare and are often confused as the marlin 336.The best way to tell is on the lever,if the trigger stays with the lever [like a browning BLR] you then have a Mossberg 472 or 479 if it stays with the receiver then you have a marlin 336.There is even a sought after Roy Rogers edition with a gold trigger,butt plate and Roy Rogers signature on the stock. Rossi of Brazil has recently started offering what is essentially a clone of the Marlin 336 series in .30-30 as well. The cartridge’s rimmed design, medium length, and moderate pressure work well for the typical lever action design. The rimmed design is also well suited for various single-shot actions, so it is commonly found there as well. Rimmed cartridges are chambered in bolt action rifles, but .30-30 bolt actions are uncommon today, despite being quite effective in the field. “At one time Winchester turned out the Model 54 bolt-action repeater in this caliber [.30 WCF], but it was a decided failure, chiefly because the man desiring a bolt action preferred to take one of the better and more powerful cartridges. However, in this particular caliber, the .30 WCF cartridge proved to be decidedly accurate.”^[11] In addition, rimmed cartridges typically don’t feed well with the box magazines normally found on bolt-action rifles.^{[12][13][14][15]} Other examples of bolt action rifles offered in .30-30 Winchester are the Savage Models 340 and 840 and the Remington 788.

In the sport of handgun metallic silhouette shooting, the .30-30 has had some success. The Thompson Center Arms Contender pistol, with its compact frame and break-open action, is ideally suited for cartridges of the .30-30′s size. With proper loading, the .30-30 will produce velocities of nearly 2000 f/s (610 m/s) out of the short 10 inch (25 cm) Contender barrel, though recoil and muzzle blast are strong from the short barrel. The longer 14-inch (36 cm) barrel results in significant reductions in felt recoil (due to increased weight) and muzzle blast, with higher velocities, especially if factory loaded rifle ammunition is used. Magnum Research offers their five-shot BFR revolver in .30-30.^[16]

[edit] Derivative cartridges

In addition to the most common factory derivations, the .25-35 Winchester, 6.5x52R and the less well known .219 Zipper, the .30-30 has also spawned many wildcat cartridges over the years. One of the more successful was the 7-30 Waters, made by necking the .30-30 case down to 7 mm (.284 inch). The 7-30 Waters eventually moved from a wildcat design to a factory chambering, with rifles being made by Winchester, and barrels made by T/C for their Contender pistol. Other .30-30 based wildcats are used almost exclusively in the Contender pistol. One of the more notable examples is the .30 Herrett, a .30-30 case necked back to reduce case capacity for more efficient loading with fast burning powders. The .30 Herrett produces higher velocities with less powder than the larger .30-30 case in the short 10 and 14 inch (25 and 35 cm) Contender barrels. Other examples are the .357 Herrett, developed to handle heavier bullets and larger game than the .30 Herrett, and the 7mm International Rimmed, a popular metallic silhouette cartridge. Bullberry, a maker of custom Contender barrels, offers proprietary .30-30 wildcats in 6 mm, .25 caliber, and 6.5 mm diameters.^{[17][18][19][20][21]} In addition, P.O. Ackley used the cartridge as the basis for the .30-30 Ackley Improved.

[edit] See also

• 7 mm caliber
• List of rifle cartridges

[edit] Notes

This custom carved Remington 308 is a favorite of mine husband’s. The movie “The Mountain Men” with Charlton Heston is almost worn out from being watched so much. He can repeat the movie to you line for line. He loves to hunt with the muzzle loader, (open sites of course!). He is often over heard saying “where is the sport in hunting an animal with a scope?”" The real sportsman is one that hunts with open sites like the mountain men did in the old days!” So, now you know where I got my inspiration for this custom carving/sculpture.

This gun has been hand carved to represent a bear tracking a man for a quick meal. After discovering he is being stalked, the mountain man out maneuvers the bear and hides hoping to get a clean shot at the bear. It is up to you to decide if the bear got away or not.

The gun was hand painted and is signed by me. It is a one of a kind original work of art. Art enthusiast around the world will be after this gun for their collections. Makes you wonder what kind of design you could have on your gun stock. I’m sure you would be the envy of your hunting club and your friends would sure be very jealous! Please contact me to see what I can do for you. Hope you enjoy this post. Happy carving! Deb

This beautiful custom carved Winchester model 70 is my latest creation. I was approached to create this gun stock while I was participating in the WARA Spring Challenge. The CEO of Montana Silver Smiths jewelry asked me to custom carve this gun stock for his wife. Deborah hunts all over the world and as you can see I have even add her favorate saying “I live to hunt”. From North America to South Africa the hunt is on for the avid hunter. Her husband commissioned me to custom carve this gun stock for their anniversary.  I’m sure his wife will proudly display her favorite gun for the entire world to see. Rick has emailed me to tell he “The stock looks fantastic. Exceeds my expectations!

The gun has been custom carved with fighting moose on one side of the gun stock and a caped buffalo on the check rest. The grips and forend have been customized with the basket weave pattern. Then to personalize the gun stock for her, I have added her name to one side and her favorate saying to the other. To complete the design, I have hand painted each scene to bring out the details even more which helps show the carving off. This gives her gun a complete new look.

Every gun collectors will be very envious of this gun. The value has doubled for this gun. Not to mention the gun will be in the family for many generations to come. Thank you for allowing to create this one of a kind work of art for your wife. I hope she enjoys it as much as I have in creating it.

A custom carved Henry Golden Boy 22 rifle will be raffled off at the upcoming banquet for the Cowboy Action Shooting Club, in Price, Utah. I was recently asked if I would donate a custom carving to the cowboy action shooting club. As you can see the Henry Golden Boy rifle shown above depicts the robbery of 1902 in Castle Gate Utah in which Butch Cassidy and the Sundance Kidd robbed the payroll office. For more information and history on the Castle Gate Robbery and other adventures of Butch Cassidy and the Sundance Kidd you can visit the following web sites: www.wyomingtalesandtrails.com/butch2.html or http://climb-utah.com/Roost/rrhistory.htm.

This gun stock is the most detailed custom carving/sculpture I have accomplished to date. After I custom carved/sculpted the chosen design. I then hand painted the art work to make the scene on this gun stock a one of a kind masterpiece. I have also inlayed ivory on the check rest. It says “Castle Gate Robbery 2011″. Gun collectors everywhere will be envious of the person who will win this gun and add it to their gun collection. This gun stock will be a cherished work of art to be handed down from generation to generation.

The Castle Gate Possee Cowboy Action Shooting Club will be holding their annual Utah State Action Shoot Championship this July 14 through 16, 2011 in Price Utah. They have a schedule of times and places listed on their web site http://www.thecastlegateposse.net/. A banquet is being held Saturday July 16, 2011 at the  Elks Lodge in Price, Utah at 6:00pm. At which time this gun will be raffled off . All proceeds will go to the scholarship fund the SASS cowyboy action shooting club have set up. The banquet is the last event of the SASS Utah State Championship.  If you would like more information on the SASS cowboy action shooting club you can go to their web site www.thecastlegateposse.net . For those who live outside of Utah and are interested in cowboy action shooting. You can visit the official SASS web site http://www.sassnet.com/index.php.

I am going to do my best to attend the banquet. I will enjoy seeing who will win my gun. Good luck to all who enters the raffle for this beautiful one of a kind work of art. Deb

This year I have been given a very unique opportunity to custom carve a gun stock for the Mule Deer Foundation. The custom carved/engraved gun stock shown above is for one of the banquet coming up in May 2011. I believe this gun is to be raffled off during one of the banquets here in Utah. Everyone will have to attend their banquet to see which region gets to raffle off this gun for one of its members. Will it be YOU???

I have custom carved/sculpteda mule deer on the butt stock of the gun, as well as inlay-ed the MDF logo on the end of the grip. The art work for this gun has been custom designed for the MDF and hand painted by me. This gun has been signed and dated with the year I have carved it. Your children will fight over who gets this gun when you pass it from one generation to the next. Not to mention any gun collector will chomp at the bit to get the chance to add this gun to their collections.

There will be one more gun stock carved by me this year for the MDF. This will go on for the next eight years. You will have to check here often to see if I have completed another gun for the MDF. Good luck to everyone who attends the banquets. I’m looking forward to seeing who the winner will be for this custom carved gun stock! Happy Hunting!!! Deb

This custom carved Henry Repeating Arms.17 HMR was a Christmas present for my father. When I began carving/sculpting guns, my dad showed a lot of interest in my abilities. He would take my business cards around to everyone he knew to brag on me. It seemed quite silly to me at the time. That he would do this for me. Then last Thanksgiving, my mother asked me what I thought he would like for Christmas? See, my father owns a few guns but no longer hunts, due to his health. I know he always enjoyed going and he has always owned some guns. My mother on the other hand, hates guns. She knows how to shoot and can out shoot many men. Still, she doesn’t like them at all. So, when I mentioned to her she should buy dad a new gun. You can imagine what the response was. Then dad told her how much he would like to have a gun like Allen’s, (my husband) Henry .17 HMR. Well, mom called me and asked if I could get her a gun for dad. WOW! what a surprise that was. When we gave the gun to dad he was very happy. Then I told him I would be custom carving a design on the gun for him. Dad had tears in his eyes. I knew then I had picked the right present for father.

After Christmas, Dad picked out the picture he wanted on the gun stock. Then the designing began! After hours of drawing, cutting, and erasing I finally found a pattern that would compliment the gun. I then molded the design into clay. Also, changing more of the pattern to fit the gun. Then I started carving the design onto sample pieces of wood. This process also required more changes. Finally the pattern was ready for the gun stock. When I started carving the gun stock, the pattern just seemed to appear. It wasn’t difficult by any means. It was like this pattern was just meant to be on this gun stock.

After finishing the carving, I began playing with colors. The more I played the more fun it became to see the picture emerge and take shape. But the best part of this entire project was when I placed the gun back in my father’s hands and watched him look at the gun for the first time. You could see how proud he was to own a gun as beautiful as this one. See, Dad is a welder by trade but he is a carpenter at heart. So for me to custom carved a gun for him was a real thrill. For him, having the gun stock custom carved is one thing, but to have it  custom carved by his daughter was a totally different matter. I truly do not remember being more proud of what I do then at that moment. Thanks Dad for allowing me to custom carve this gun stock for you!

The gun has been custom carved/sculpted, and hand painted. Gun collectors alike would enjoy having this gun in their collection. This gun will be handed down from generation to generation of this I am sure. Not to mention the bragging rights of owing a custom carved gun stock by Deb Lindsay. This gun will be on display at the up coming Western Art Rodeo Association first ever art show on April 29, 30, 2011 at the Sundance Resort. I do hope everyone that can attend will do so. While you are there, please look me up. I would really enjoy meeting you. We can talk about designing a custom carved/sculpted gun stock for you.

Thanks for visiting my web site/blog. I do hope you will sign up for my email list. Thanks Deb

I am writing this blog post to thank everyone who visited with me at my booth during the International Sportsman’s Expo this last weekend, and to all who are interested in my custom carved gun stocks. The Expo was fantastic! As usual! There where thousand of people roaming around seeing all the exhibits and booths. Of course the Mule Deer Foundation and Rocky Mountain Elk Foundation was present. I enjoyed visiting with many of the participants at the show as well as seeing all the different booths. It was great hearing what everyone was interested in and what they would like to have on their guns, antlers or on their fireplace mantles.

I would like to take this time to extend an invitation to become a subscribe to my email list. This invitation is for each and every person who visits my web site, came to my booth, or who knows someone who would enjoy my custom carvings. When you subscribe to my email list, you will receive information I post here from time to time. Normally, I will post two to three times a month to my blog. You are under NO obligation to sign up or to stay signed up as a subscribers on my email list. You can end your subscription at anytime. My blog keeps you informed as to the what is new. Not to mention the history of guns, gallery of custom carved guns, and custom carved wood sculptures. There is hand painted gun stocks, basket weave carved onto guns stocks, hand painted art, wood sculpting, guns for the collectors, and guns everyone will want to hand down from generation to generation. As well as other interesting facts I have uncovered throughout the years. I do hope you will consider joining my subscribers email list.

Custom Carved International Sportsman’s Expo. If anyone doesn’t know by now, the International Sportsman’s Expo is going to be held in Salt Lake City, UT at the South Town Expo center. The show will be starting this Thursday, March 17, 2011, at noon. I will have a booth there displaying my custom carved guns and taking orders for YOUR very own custom carved gun stock. Please come and visit me at the expo. I would really enjoy meeting you and discussing the design you would like me to carve on your gun stock.

All of my guns have a custom carved/sculpted scene, (some with the basket weave pattern) and are hand painted. Each gun is a one of a kind work of art. Collectors, nationwide, have begun collecting my guns. Why not have your gun customized with your favorite hunting scene or memory. You will want to hand this gun down from generation to generation. Not to mention the “double” bragging rights you will have. Bragging rights #1 – the actual hunt. Bragging rights #2 – your own custom carved gun stock with your favorite hunting scene.  

I hope everyone will take the opportunity to come and enjoy the International Sportsman’s Expo while the it is going on. The dates are March 17, 18, 19, 20, 2011. Check the web site, International Sportsman’s Expo, for more information on this event.

See you there!!!! Deb – Proudly endorsed by the Mule Deer Foundation (MDF)

This post is to announce that Deb Lindsay Studios and her custom carvings are proudly endorsed by the Mule Deer Foundation (MDF). Deb has signed a contract with the MDF to custom carve/sculpt one gun stock per year for the next nine years. These guns will be auctioned or raffled off to help raise money for the MDF. Deb is proud to be associated with their cause and will do her best to help further the work of this organization. Be watching for the upcoming article of Deb Lindsay and her custom carved/sculpted gun stocks. It will be in the MDF magazine soon.

Deb will be donating a custom carved/sculpted gun stock worth over $1,500.00, or more, to the Mule Deer Foundation’s banquet. This year the banquet will be held in May.  This years gun will be custom carved/sculpted and hand painted by Deb Lindsay. It will feature mule deer and have the MDF logo on the gun stock. Each gun stock is signed, hand carved and hand painted by Deb Lindsay. Gun collectors alike dream of owning one of Deb Lindsay Studios custom carvings. Everyone who owns one of Deb Lindsay’s custom carved guns will tell you how proud they are to be able to hand their gun down from generation to generation. Will you be the next to own one of Deb’s custom carved/sculpted guns?

Pictures of the pattern and gun will be posted soon.